The Deka II
injector is a bottom feed injector designed for applications with
hot-fuel handling concerns or for those with special requirements
justifying the use of this configuration.
The injector is available with either low or high impedance coil. Low
impedance is usually selected for higher flow applications, or those
where operation at lower pulse widths is critical.
The electrical connector style is the Minitimer.
Fuel spray patterns and flow calibrations can be sized to meet
application needs.
Base Injector
Configuration
O-ring to O-ring
Dimension
Overall Height
Standard
30 mm
58 mm
Nozzle
Configuration
Tip Length
Standard
3.5 mm
Connector
Configurations: Minitimer Coil Resistance: 1.8 or 12 ohms Spray Patterns: click here for spray pattern options. Static Flow Ranges: Custom flow ranges are evaluated on
an application-by-application basis
