Our fuel pulsation dampers
come in a variety of package styles to meet your installation
requirements.
Synerject does not require customers to conform to an “off the shelf”
configuration or calibration. While typical system pressures are 70 –
500 kPa, we will work with you to design a damper that meets the needs
of your particular application.
Depending on the damper type, the O-ring may or may not be captured on
the damper. Where the O-ring is captured, a fluorocarbon O-ring is
installed on the delivered product. Where it isn’t captured, Synerject
can supply appropriately sized O-rings for correct installation into
our recommended pocket geometry. |
